Rilsan PA11 BMNO HF TL — Properties, Datasheet & Alternatives
Arkema · Bio-PA11 · Bio-based PA11, high flow injection
Alternatives to Rilsan PA11 BMNO HF TL — same family, same reinforcement
- Rilsan PA11 LMFO — Arkema · Bio-PA11
- Rilsan PA11 BESNO A FDA — Arkema · Bio-PA11
- Rilsan PA11 BESVO A — Arkema · Bio-PA11
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.04 g/cm³ |
| Melt Volume Rate (MVR) | 25 cm³/10 min |
| Tensile Strength | 47 MPa |
| Elongation at Break | 250 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 46 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Complex thin-wall parts
- electronic housings
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.