Rilsan PA11 MB50 TL — Properties, Datasheet & Alternatives
Arkema · Bio-PA11-GF50 · Bio-based PA11, 50% glass fiber reinforced
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Rilsan PA11 MB50 TL →Technical Properties
| Density | 1.5 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 150 MPa |
| Elongation at Break | 2.5 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 190 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- High-strength structural parts
- automotive under-hood
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.