Ultraform S2320 003 — Properties, Datasheet & Alternatives
BASF · POM
Alternatives to Ultraform S2320 003 — same family, same reinforcement
- Duracon WR-01 — Polyplastics · POM
- Hostaform C 9021 SW — Celanese · POM
- Duracon M140-44 — Polyplastics · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.41 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 62 MPa |
| Elongation at Break | 25 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 108 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Gears
- bearings
- conveyor parts
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.