Ultrason E 2010 — Properties, Datasheet & Alternatives
BASF · PES · Standard PES for high-heat applications
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Ultrason E 2010 →Technical Properties
| Density | 1.37 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 85 MPa |
| Elongation at Break | 30 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 6 kJ/m² |
| HDT (1.8 MPa) | 203 °C |
| Vicat Softening Temp | 225 °C |
| Processing | injection molding, extrusion |
Typical Applications
- aircraft interiors
- automotive lighting
- hot water applications
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.