Ultrason E 2010 G6 — Properties, Datasheet & Alternatives
BASF · PES · 30% GF PES for structural applications; 30% GF
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Ultrason E 2010 G6 →Technical Properties
| Density | 1.54 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 145 MPa |
| Elongation at Break | 3 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 8 kJ/m² |
| HDT (1.8 MPa) | 218 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- structural aircraft parts
- industrial pumps
- impellers
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.