Ultrason S 3010 — Properties, Datasheet & Alternatives
BASF · PSU · High-flow PSU for thin-wall injection molding
Alternatives to Ultrason S 3010 — same family, same reinforcement
- Udel P-1700 — Solvay · PSU
- Ultrason S 2010 — BASF · PSU
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.24 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 72 MPa |
| Elongation at Break | 45 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 5 kJ/m² |
| HDT (1.8 MPa) | 173 °C |
| Vicat Softening Temp | 188 °C |
| Processing | injection molding |
Typical Applications
- thin-wall medical
- electronic housings
- food containers
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.