Zenite 6130L — Properties, Datasheet & Alternatives
Celanese · LCP · 30% GF low-warp LCP for flat connectors; 30% GF
Alternatives to Zenite 6130L — same family, same reinforcement
- Vectra E130i — Polyplastics · LCP GF30
- Zenite 7130 BK — Celanese · LCP GF30
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.62 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 180 MPa |
| Elongation at Break | 2 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 270 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- flat connectors
- board-to-board
- FPC connectors
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.