Teflon PTFE GF-15 — Properties, Datasheet & Alternatives
Chemours · PTFE · 15% GF
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Teflon PTFE GF-15 →Technical Properties
| Density | 2.2 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 20 MPa |
| Elongation at Break | 200 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 120 °C |
| Vicat Softening Temp | no data |
| Processing | compression molding |
Typical Applications
- Bearings
- piston rings
- wear pads
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.