Polylac PA-707 — Properties, Datasheet & Alternatives
Chi Mei · ABS
Alternatives to Polylac PA-707 — same family, same reinforcement
- Starex ABS SV-0167 — Lotte Chemical · ABS
- Terluran GP-35 — INEOS Styrolution · ABS
- Magnum 9020 — Trinseo · ABS
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.04 g/cm³ |
| Melt Volume Rate (MVR) | 16 cm³/10 min |
| Tensile Strength | 43 MPa |
| Elongation at Break | 25 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 18 kJ/m² |
| HDT (1.8 MPa) | 83 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Appliances
- consumer electronics
- housings
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.