Delrin 500AF — Properties, Datasheet & Alternatives
DuPont · POM
Alternatives to Delrin 500AF — same family, same reinforcement
- Ultraform N2720 M210 UN — BASF · POM
- Ultraform N2710 M210 — BASF · POM
- Hostaform C 9021 M — Celanese · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.54 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 50 MPa |
| Elongation at Break | 8 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 130 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Bearings
- sliding parts
- low friction
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.