Vestamid HTplus M1000 — Properties, Datasheet & Alternatives
Evonik · PPA · Unreinforced PPA for chemical resistance and toughness
Alternatives to Vestamid HTplus M1000 — same family, same reinforcement
- Amodel ET 1001L — Solvay · PPA
- ForTii F11 — DSM · PPA
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.13 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 78 MPa |
| Elongation at Break | 50 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 115 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding, extrusion |
Typical Applications
- oil & gas tubing
- fuel lines
- coolant pipes
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.