Novodur P2MC — Properties, Datasheet & Alternatives
INEOS Styrolution · ABS
Alternatives to Novodur P2MC — same family, same reinforcement
- Polylac PA-717C — Chi Mei · ABS
- Cycolac MG47 — SABIC · ABS
- Magnum 3416SC — Trinseo · ABS
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.05 g/cm³ |
| Melt Volume Rate (MVR) | 18 cm³/10 min |
| Tensile Strength | 44 MPa |
| Elongation at Break | 20 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 16 kJ/m² |
| HDT (1.8 MPa) | 84 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Chrome plating
- decorative automotive
- sanitary
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.