Genestar GR2300 — Properties, Datasheet & Alternatives
Kuraray · PA9T (PARA) · 30% GF PA9T for general injection molding; 30% GF
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Genestar GR2300 →Technical Properties
| Density | 1.33 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 155 MPa |
| Elongation at Break | 4 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 9 kJ/m² |
| HDT (1.8 MPa) | 270 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- automotive connectors
- industrial electronics
- LED housing
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.