Acrypet IRG504 — Properties, Datasheet & Alternatives
Mitsubishi Chemical · PMMA · impact modified
Alternatives to Acrypet IRG504 — same family, same reinforcement
- Altuglas HFI-7 — Trinseo · PMMA
- Plexiglas Hi-Gloss FT15 — Röhm · PMMA
- Plexiglas Resist 45 — Röhm · PMMA
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.15 g/cm³ |
| Melt Volume Rate (MVR) | 4 cm³/10 min |
| Tensile Strength | 38 MPa |
| Elongation at Break | 35 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 7 kJ/m² |
| HDT (1.8 MPa) | 74 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Protective covers
- signage
- automotive
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.