Iupital F30-03 — Properties, Datasheet & Alternatives
Mitsubishi Chemical · POM · High-flow POM for thin-wall precision parts
Alternatives to Iupital F30-03 — same family, same reinforcement
- Hostaform C 9021 — Celanese · POM
- Duracon M90-44 — Polyplastics · POM
- Delrin 500T — DuPont · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.41 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 66 MPa |
| Elongation at Break | 35 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 6 kJ/m² |
| HDT (1.8 MPa) | 108 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- thin-wall connectors
- precision mechanisms
- consumer electronics
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.