Duracon SW-01 — Properties, Datasheet & Alternatives
Polyplastics · POM · Low-friction POM for sliding applications
Alternatives to Duracon SW-01 — same family, same reinforcement
- Delrin 100ST — DuPont · POM
- Delrin FG100ST — DuPont · POM
- Hostaform C 9021 TF — Celanese · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.41 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 56 MPa |
| Elongation at Break | 30 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 5 kJ/m² |
| HDT (1.8 MPa) | 100 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- sliding guides
- bearings
- conveyor components
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.