Plexiglas 7N — Properties, Datasheet & Alternatives
Röhm · PMMA
Alternatives to Plexiglas 7N — same family, same reinforcement
- Acrypet MD001 — Mitsubishi Chemical · PMMA
- Acrypet MF001 — Mitsubishi Chemical · PMMA
- Altuglas V920T — Trinseo · PMMA
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.19 g/cm³ |
| Melt Volume Rate (MVR) | 10 cm³/10 min |
| Tensile Strength | 70 MPa |
| Elongation at Break | 4 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 1.5 kJ/m² |
| HDT (1.8 MPa) | 92 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Thin-wall transparent parts
- cosmetics
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.