Cycolac HMG75 — Properties, Datasheet & Alternatives
SABIC · ABS
Alternatives to Cycolac HMG75 — same family, same reinforcement
- Starex ABS HG-0860 — Lotte Chemical · ABS
- Polylac PA-747S — Chi Mei · ABS
- Magnum 3416SC — Trinseo · ABS
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.05 g/cm³ |
| Melt Volume Rate (MVR) | 14 cm³/10 min |
| Tensile Strength | 46 MPa |
| Elongation at Break | 22 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 17 kJ/m² |
| HDT (1.8 MPa) | 87 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Automotive interior
- visible parts
- glossy housings
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.