Ultem 2300 — Properties, Datasheet & Alternatives
SABIC · PEI · 30% GF PEI for structural high-temp applications; 30% GF
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Ultem 2300 →Technical Properties
| Density | 1.51 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 155 MPa |
| Elongation at Break | 3 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 7 kJ/m² |
| HDT (1.8 MPa) | 210 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- structural aerospace
- pump housings
- jet engine components
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.