Ultem 2400 — Properties, Datasheet & Alternatives
SABIC · PEI · 40% GF, FR
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to Ultem 2400 →Technical Properties
| Density | 1.6 g/cm³ |
| Melt Volume Rate (MVR) | 2.5 cm³/10 min |
| Tensile Strength | 185 MPa |
| Elongation at Break | 2.5 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 9 kJ/m² |
| HDT (1.8 MPa) | 212 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- High-strength structural
- metal replacement
- automotive
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.