VICTREX PEEK-HT — Properties, Datasheet & Alternatives
Victrex · PEEK-HT · High-temperature PEEK for continuous use above 260°C
Sourcing risk? Don't depend on a single supplier.
Find verified alternatives to VICTREX PEEK-HT →Technical Properties
| Density | 1.3 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 95 MPa |
| Elongation at Break | 40 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 7 kJ/m² |
| HDT (1.8 MPa) | 170 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- under-hood automotive
- engine components
- oil & gas
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.