Ultraform PDX M2 T20 — Properties, Datasheet & Alternatives
BASF · POM
Alternatives to Ultraform PDX M2 T20 — same family, same reinforcement
- Delrin 500AF — DuPont · POM
- Duracon EF-30T — Polyplastics · POM
- Hostaform C 13021 — Celanese · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.54 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 48 MPa |
| Elongation at Break | 10 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 105 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Bearings
- sliding parts
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.