Duracon HP90X — Properties, Datasheet & Alternatives
Polyplastics · POM
Alternatives to Duracon HP90X — same family, same reinforcement
- Hostaform C 9021 SW — Celanese · POM
- Ultraform S2320 003 — BASF · POM
- Hostaform C 9021 K — Celanese · POM
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.41 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 62 MPa |
| Elongation at Break | 50 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 110 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Automotive interior
- low VOC
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.