Ultem 1000 — Properties, Datasheet & Alternatives
SABIC · PEI · Standard PEI for high-heat electronics and aerospace
Alternatives to Ultem 1000 — same family, same reinforcement
- Ultem 1010 — SABIC · PEI
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.27 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 85 MPa |
| Elongation at Break | 60 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 5 kJ/m² |
| HDT (1.8 MPa) | 200 °C |
| Vicat Softening Temp | 219 °C |
| Processing | injection molding, extrusion |
Typical Applications
- aircraft interiors
- burn-in sockets
- medical trays
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.