Ultem 1010 — Properties, Datasheet & Alternatives
SABIC · PEI · High-flow PEI for thin-wall electronics
Alternatives to Ultem 1010 — same family, same reinforcement
- Ultem 1000 — SABIC · PEI
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.27 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 84 MPa |
| Elongation at Break | 55 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 5 kJ/m² |
| HDT (1.8 MPa) | 199 °C |
| Vicat Softening Temp | 218 °C |
| Processing | injection molding |
Typical Applications
- IC sockets
- connectors
- thin-wall electronics
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.