Ultem 1285 — Properties, Datasheet & Alternatives
SABIC · PEI · FR
Alternatives to Ultem 1285 — same family, same reinforcement
- Ultem XH6050 — SABIC · PEI
- Ultem 9085 — SABIC · PEI
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.27 g/cm³ |
| Melt Volume Rate (MVR) | 18 cm³/10 min |
| Tensile Strength | 82 MPa |
| Elongation at Break | 55 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | 4.5 kJ/m² |
| HDT (1.8 MPa) | 197 °C |
| Vicat Softening Temp | no data |
| Processing | injection molding |
Typical Applications
- Thin-wall electronics
- connector bodies
- fiber optics
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.