Ultem 9085 — Properties, Datasheet & Alternatives
SABIC · PEI · FR
Alternatives to Ultem 9085 — same family, same reinforcement
- Ultem XH6050 — SABIC · PEI
- Ultem 1285 — SABIC · PEI
Free account · buy-side only · your searches stay private
Technical Properties
| Density | 1.34 g/cm³ |
| Melt Volume Rate (MVR) | no data |
| Tensile Strength | 72 MPa |
| Elongation at Break | 5.9 % |
| Flexural Modulus | no data |
| Impact Strength (Charpy) | no data |
| HDT (1.8 MPa) | 153 °C |
| Vicat Softening Temp | no data |
| Processing | FDM 3D printing, injection molding |
Typical Applications
- 3D printed aircraft parts
- aerospace prototyping
Data compiled from publicly available technical datasheets. Values are typical, not guaranteed specifications. Always verify with the supplier's current TDS.